SWIT – S-1221F 21,5″ HDSDI & HDMI Monitor

kr600.00 eks. MVA

  •  21.5-inch IPS LCD Panel with LED backlight 
  • 1920×1080 resolution, 1000:1 contrast
  • H/V 178° viewing angle
  • Underscan / Overscan, safe area
  •  HD/SD-SDI, HDMI, CVBS input
  •  Build-in HDMI to SDI conversion output
  •  Waveform (Y/Cb/Cr/R/G/B), with full scale
  •  Vector scope, RGB histogram
  •  Peaking focus assist (red/blue switch)
  •  Embedded audio meter (SDI 16-ch, HDMI 8-ch)
  •  Real time video zoom-in and flip
  •  SDI timecode display
  •  False color, Blue only, Zebra, colorbar
  •  3-color TALLY light
  •  Customer editable video TITLE
  •  Magnetic attached LCD protective glass
  •  V-mount / Gold mount battery plate optional
  •  Hardcase roller case
  • C-stand bracket
  • Power Cord
  • V-mount adapter plate

✓ 1på lager

Fra:
Til:

Viktig: Du kan endre leie datoer for andre produkter du ønsker å leie i handlevognen!

...

Beskrivelse

The S-1221F adopts a 21.5-inch LCD panel, with Full HD 1920×1080 resolution and LED backlight, 1000:1 contrast. The viewing angle is Horizontal: 178° / Vertical: 178°

S-1221F can be used on site camera monitoring and broadcast studio technical monitoring. The LCD monitor offers accurate color reproduction for broadcast application.

 

The color temperature might get changed after years, and users can enter the menu to adjust the RGB Gain and Bias to calibrate the colors at any time.

The build-in conversion is used to broadcast and deliver the HDMI camera video. It’s same format conversion and supports the following HDMI formats:480p, 576p, 720p (60 / 59.94 / 50), 1080i (60 / 59.94 / 50), 1080p (30 / 29.97 / 25 / 24 / 23.98)

S-1221F supports Waveforms display under both SDI and HDMI, including Y, Cb, Cr, R, G, B channels, and full scale display of each channel. The Vector scope and R/G/B histogram can be switched on/off independently to the waveforms.

The monitor displays SDI and HDMI embedded audio level meters, and supports full 16-ch meters under HDSDI input; 8-ch meters under SDSDI and HDMI input. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB.
The ch-1 and ch-2 embedded audio can be output via 3.5mm headphone socket and speaker.

Under focus assist mode, the in-focused subject will be sketched out by red or blue lines. The focus assist is also available during the image zoom-in.

You can select the scale of safe area frame from 80%, 85%, 90% and 95% in the menu system. And under HD input, the monitor can display a center 4:3 marker, to help composition the image when using HD recording while SD broadcasting.

There are front TALLY lights for each screen, with 3 colors display, and controlled via DB-9 ports on the rear panel.